Aluminium Cladding Steel Wire Forming Machine Aluminum Extrusion Machine

Aluminium Cladding Steel Wire Forming Machine Aluminum Extrusion Machine

aluminium cladding steel wire forming machine
1. REXORTH gydraulic system
2. SIEMENS PLC
3. ENROTRERM DC driver

aluminium cladding steel wire forming machine

Continuous Extrusion Production Line for Aluminum Clad Steel Wires

1. Aluminum Feedstock

Diameter: 2×F9.5mm

Diameter Tolerance: ±0.2mm

Maximum Yield Stress: 95 Mpa

2. Core Steel Wire

Minimum Diameter: 3 mm

Maximum Diameter 7 mm

Diameter Tolerance: ±1.5%d

Carbon Ratio; 0.6~0.75%

Yield Stress: 1100~1450 MPa

3. Continuous Extrusion Product for Aluminum Clad Steel Wires

Diameter: 3.6-8.1 mm

Diameter Tolerance ±1.5% d

Minimum Aluminum Cover Thickness

10% Nominal Radius(20% Conductive Rate)

14% Nominal Radius(27% Conductive Rate)

15% Nominal Radius (30% Conductive Rate)

25% Nominal Radius(40% Conductive Rate)

Conductive Rate 14%-40% complies with the GB/T17937-1999 standard

Highest Production Line Speed: 160m/min

Upper Speed limit: 180m/min

Power : 3 Phase 380V, 1Phase, 220V, 50Hz, 650KVA, note the real load is related to the size and speed of production, general figure is 360kw

Plant Space: L×W×H=50m ×12m×4 m

The Description of Production Line Equipment

1 Introduction of the Continuous Extrusion Production Line for Aluminium Cladding Steel Wire

With the method of tangent mode continuous cladding, the outside surface of treated clean steel wires will be clad by aluminum during extrusion, then get the raw aluminum clad steel wire as product. In next process, by drawing bench we can get the aluminum clad steel wires.

Illustrating of Continuous Cladding Production Line Process

steel wire processing

aluminum extrusion

aluminium extruded products

Aluminium Cladding Steel Wire Forming Machine Aluminum Extrusion Machine Images